Glass bottle rinsing filling capping machine for alcohol drinks
- Brief Description
- Related Products
|The glass bottle washing/filling/capping three-in-one machine is a new product developed on the basis of the introduction of Italian filling technology. The machine integrates flushing/rinsing, filling and capping, with scientific and reasonable design, beautiful appearance, convenient operation and maintenance, and high automation. Mainly suitable for alcohol filling of glass bottles. A variety of bottle types are available for a small number of parts.|
The structural high-quality countertop and channel steel are used as the chassis, and the exterior is 304 stainless steel layer, 304 stainless steel body frame, stainless steel adjustable foot.
|Bottle feeding mechanism
The bottle feeding method of the upper bottle conveying line and the bottle dial feeding wheel is directly connected. The use of the dial bottle holding type transmission technology, stable entry into the filling position, the user does not need to adjust the height of the device when changing the bottle shape, just replace the nylon wheel and the bottle guard plate.
Rotary bottle washing section?
Rotary filling system
The filling machine adopts German technology and satisfies the requirements of full filling required for filling.
Rotary capping system
Caps sorting system
Frequency control, each moving mechanism adopts open gear transmission, which has high efficiency, low noise, long service life, convenient maintenance and stable operation. Each bottle star wheel is an engineering plastic part with a safety protection mechanism to ensure the safety and reliability of the equipment.
Electronic control system
The electric control cabinet PLC automatically completes the whole process control of the three-in-one bottle machine from the bottle to the bottle. Operate with a touchscreen
1)The advanced frequency control system is adopted, and the key electrical components are all internationally renowned?brands of products.
2)It is convenient to replace the bottle type by using the lower holder type filling.3)Spring-type rinsing bottle clamp and the empty bottle is automatically rotated 180 degrees with the track, the inside and outside are flushed twice, and the rinsing efficiency is high.
4)Pressure type filling liquid level positioning, quantitative and accurate.
5)Magnetic torque type capping head ensures tightness without damaging the cap.
6)Use the filling head to move up and down, and the bottles run on the same level to ensure the stability of the bottle.
7)The machine is low in noise and comparable to international counterparts.
SUS304 stainless steel 50 x 50, thickness 1.5MM
Other metal material
SUS304 stainless steel, thickness 1.5MM
round or square bottle
Bottle diameter ø50-ø100mm;
Bottle height 150-320mm;