Molding Machines http://www.pbjandshay.com Wed, 26 Feb 2020 18:35:08 +0000 Joomla! - Open Source Content Management en-gb 2,000BPH-6,000BPH automatic blow molder http://www.pbjandshay.com/index.php/pr/molders/item/74-6000bph-blow-molder http://www.pbjandshay.com/index.php/pr/molders/item/74-6000bph-blow-molder 2,000BPH-6,000BPH automatic blow molder
Summary
SLA6-B Automatic stretch PET bottle blow moulding machine, with high performance rate of 6000BPH for 500ml PET, also suit for blowing any bottle sizes from 50ml to 2,000ml PET bottles.
 
It adopts special innovative unique technology by combining the heating tunnel and blowing system into one unit, that greatly shorten the time of bottle molding production, and blowing quality and output capacity are sharply speeded up than ever. Moreover, the potential damage to the blowing machine is also greatly decreased to keep a endurable service life for this blowing machine, also greatly increase the security of operation for the user. With smoothly and steadily performance, the machine becomes very popular in bottle molding industry.
 
This bottle blow moulding machine adopts special preform uploading system with patented preform feeding technology, which includes two sets of preform conveying system, linear feeder and preform inverse feeder.
The linear one move preforms up to preform holder, along with conveyor chain by holding the preform neck, after enough preheating in the heating tunnel, the inverse feeder grips these heated preforms , turnover 180 degree with the neck, and feed into the blowing system for bottle blowing process. After stretching and blowing, bottles are taken off by inverse system and feed out along the conveyor belt.
With this special PET preform loading and unloading system, this machine greatly avoid any potential damages to preforms and bottle in the whole bottle making production.
Bottle blow molder is fully controlled with PLC controlling system. There is no second time pollution to the bottles and preforms, nor labor waste, because the complete operation can be done completely with PLC controller.
This machine includes three main systems: PET preform loading system, PET preform preheating system, and PET preform blowing system.
 
Features
•Feeding system carries the preforms by robot arms automatically.
•This full automatic PET bottle blow molding machine is suitable for producing PET plastic containers and bottles in all shapes.
•Adopting high quality components
•It is widely used for producing the carbonated bottle, mineral water bottle, pesticide bottle, oil bottle, cosmetics bottle, wide-mouth bottle and hot filling bottle etc,
•Fully automatic process with low investment, high efficiency, quick and safe for operation, easy for maintenance.
•with reasonable high efficient design, full automatic controlling, save power and labor.
•Infrared oven heater adopts the quartz lamp to heat the PET tube.
 
Operation
The standard operation of bottle blow moulding machine includes follow four steps
Step1. Load the PET preform into preform hopper and the conveyer will take the preform to sorting system automatically.
Step2. Load the PET preform with the neck upto PET preform holder, and then preform is delivered into heating tunnel.
Step3. After heating, preform is conveyed into the blow system, then moulds closes, stretches and blows under low pressure and high pressure, exhausting, and opens the mold.
Step4. The finished bottle is taken off by automatic unloading system.
 
 
]]>
steplead@steplead.com (Super User) Molding Machine Sat, 25 Apr 2015 23:37:35 +0000
5 Gallon PC Bottle Extrusion Molders http://www.pbjandshay.com/index.php/pr/molders/item/82-pc-bottle-molders http://www.pbjandshay.com/index.php/pr/molders/item/82-pc-bottle-molders 5 Gallon PC Bottle Extrusion Molders
Summary
This PC 5 gallon blow moulding machines is the best choice for blowing 5 gallon BPA free PC bottles, assure you have a perfect products marketing effect with our high technology standard and perfect after service.
 
Features
Clamping unit.
Like all main structures of the system the clamping unit is undertaken a stress analyses by Finte Element Methods, Instructed by STAR - rails and adopts proportional hydraulic valves, central lubricating unit, fast movements are possible to assure high output capacity. The sturdy design and the placement of the cylinder in the centre of the clamping platens provides a good cutting and a long lifetime of the moulds.
 
Extrusion unit.
•Screw design structure for high output that assures even plasticizing
The developing of the extrusion unit has been done by German engineers and has the following main features:
•Frequency controlled drive
•PCC- controlled heating /cooling zones
•Grooved, force-cooled feeding zone
•Screw and screw heads are suitable for all common thermoplastics, like PE, PP, PETG, PA........
 
Die heads.
Like the extruders, the die heads are developed to the highest standards by German engineers:
•Single to triple layer die heads provide the possibility to produce a wide range products to the special demands of customers
•View stripe equipment for all die heads is available.
•Small centre distances of the multiple die heads allow higher number of cavities
•Distribution units with spider and heart curves assure an even wall thickness distribution and convenient for changing color
•All die heads are equipped with WDS and adjustable die to optimize the wall thickness and minimize the material use
 
Moulds.
Designed from well trained engineers, made from imported steels with optimized cooling and the necessary article depending parts like die tooling, blow pins and deflashing unit make out of the system a ready production unit where all parts fit for high output capacity in perfect quality.
 
Deflashing unit.
To assure safe, automatic and optimized productions, different additional are available like:
•After cooling unit
•Deflashing units.
•Hot and cold cutter.
•Parison closing device.
 
Control unit.
Integrated PCC control unit from B&R (Austria). All functions are controlled by the unit. Values are easy to be set and monitored on a 10.4" colour display. As well as the temperature is controlled by the unit, the movement of the die is controlled by an integrated 100 points WDS unit.
 
 
 
 
]]>
steplead@steplead.com (Super User) Molding Machine Sun, 26 Apr 2015 00:52:05 +0000
Caps Injection Molders http://www.pbjandshay.com/index.php/pr/molders/item/83-caps-molders http://www.pbjandshay.com/index.php/pr/molders/item/83-caps-molders Caps Injection Molders
Summary
IM series full automatic injection molding machine is popular for making plastic products, including PET preforms, bottle caps, and all of injection plastic products. Basing on independent intellectual property rights, with advance of the world famous high technology and equip with international famous component suppliers, and yearly experienced engineers in Steplead injection Machinery manufacturing. 
 
Features
Clamping system
•Hydraulic powered mould height regulation operated from controlling panel.
•Low pressure mould closing protection.
•Automatic lubrication structure(under 160F as option)
•Digital low pressure mould protection setting system and hydraulic ejecting system with regulating stroke.
•Ejector stroke measure in mm with linear transducer(Optional)
•Mechanical drop bar and electrical interlock safety protection device.
•Three-stages speed and pressure setting on clamp open and shut.
 
Injection system
•Swiveling multi-channel water flow regulators with temperature indicator(under 350F as option)
•Nitride hardened screw and barrel.
•Pivot injection unit to facilitate change of screw and barrel.
•20:1 L/D injection screw for homogeneous plasticizing.
•Direct screw drive by radial-piston hydraulic motor with digital speed and pressure control
•Dual pulling carriage cylinders assures perfect in line contact between nozzle and sprue bushing
•Melt decompression(screw suck-back ) and screw back pressure adjustment.
 
Control System
•Two built in standard sets of core sequence programmed.
•PID temperature control with cold start prevention & actual temperature indication.
•Self-diagnostic function
•Machine status display.
 
Hydraulic system
•All oil switches concentrated above oil circuit block create more ceonvenience for maintain and operation.
•Regulation of back pressure with pressure valves offer as an additional option, the control accuracy can be increased up to 0.1%.
•Adoption of intelligent electric saving, and automatic regulation the flow of discharging pump according to required running capacity to reach the best power saving.
•All the hydraulic parts and seals are from world famous suppliers.
 
 
 
 
]]>
steplead@steplead.com (Super User) Molding Machine Sun, 26 Apr 2015 01:02:17 +0000
PET 5 Gallon Blow Molder http://www.pbjandshay.com/index.php/pr/molders/item/81-5-gallon-molder http://www.pbjandshay.com/index.php/pr/molders/item/81-5-gallon-molder PET 5 Gallon Blow Molder
Summary
PET bottle blowing molding machine are especially used to blow 11L ~ 20L PET bottles
 
Features
•High efficiency with affordable investment.
•Small machine dimension and compact construction.
•Convenient operation, good for one person operation.
•Energy saved, and endurable service life, adopting new double crank four bars to lock mould, the cross fixed. 
•Machine is adopted the most innovative and market trend-leading high technology, enable customer to take the most superior competition position.
•Adopt the world famous CAD/CAM/CAE technology to improve qualities and develop the new machines.
•Have ISO9001 international quality certification to assure our high quality machines.
•Over 20 years experience in production of blowing molding machine and tools.
•Exported our products to Japan, Europe, South & North America, Southeast and Middle-east of Asia, over 100 countries and areas.
 
PET Bottle Blow Molding Machine Operation
(1) PET Preform preheating
Manually load preform onto the holder of heating oven. The holder carries the preform into oven heating channels where PET preforms will be heated under setting temperature. After that, a rotary PET prefrom holder will convey the heated preforms out from channel.
(2) loading preform
Manually take out the heated preform and put them into the blowing moulds carefully.
(3) Pre-blowing with stretching inside the blow molds.
(4) shaping with high air pressure by pressing two startup buttons at the same tine, the machine starts automatic mold blowing process. The bottle would be shaping with high air pressure.
(5) Take out the finished bottle
Take a ready bottle out from the PET blow molder.
(6) Take out the finished bottle
Feed another PET preform into the rotary holder of reheating oven and start another bottle blow moulding cycle.
]]>
steplead@steplead.com (Super User) Molding Machine Sun, 26 Apr 2015 00:42:43 +0000
1800BPH SEMI-AUTO BLOW MOLDER FOR 50ml-2L http://www.pbjandshay.com/index.php/pr/molders/item/79-1800bph-semi-auto-blow-molder-for-50ml-2l http://www.pbjandshay.com/index.php/pr/molders/item/79-1800bph-semi-auto-blow-molder-for-50ml-2l 1800BPH SEMI-AUTO BLOW MOLDER FOR 50ml-2L
Summary
For small bottle business or business beginning, semi-automatic PET blow molding machine and its assistant machines are popular in producing 50ml - 2000ml PET bottles, flexible for producing any shape of plastic PET bottles with customers’ special requirements.
With our years experience in making PET molding machine, we would provide tailored products and service to meet any meets from customers.
 
Features
•High efficient and accurate working ability with low investment.
•Small machine dimension size and compact inner construction to save much production space.
•Convenient operation and easy maintenance, only need one work to operate.
•Power saved, and long service life, adopting new double crank four bars to lock moulds, the cross fixed. 
•Machine is adopted the world innovative and market trend-leading blowing technique, helping customer holding the most superior competition advance.
•Adopt the world first-class CAD/CAM/CAE technology to improve blowing quality and develop the new products.
•Have ISO9001 international quality certification to assure our perfect quality products.
•More than 20 years in manufacturing blow molding machine and moulds industry.
•Exported our products to Japan, Europe, South & North America, Southeast and Middle-east of Asia, over 200 countries and areas.
]]>
steplead@steplead.com (Super User) Molding Machine Sun, 26 Apr 2015 00:32:36 +0000
1800BPH semi-auto blow molder for 3L-7L http://www.pbjandshay.com/index.php/pr/molders/item/77-1800bph-semi-auto-blow-molder http://www.pbjandshay.com/index.php/pr/molders/item/77-1800bph-semi-auto-blow-molder 1800BPH semi-auto blow molder for 3L-7L
Summary
SL-C2 PET blow molding machine and its assistant machines are especially used to produce 3L - 7L bottles in PET bottle production industry, also widely used to produce various shapes of plastic PET bottles.
 
Features
•Exported our products to Japan, Europe, South & North America, Southeast and Middle-east of Asia.
•Energy saved, and endurable service life, equipped with new double crank four bars to lock mould, the cross fixed.
•High efficiency working ability economic investing.
•Adopt the innovative CAD/CAM/CAE technology to improve qualities and develop the new products.
•Small machine dimension size and compact inner construction with no space waste.
•Convenient operation and maintenance, only need one person operating.
•Machine is adopted the most advanced and market trend-leading technique, facilitating customer holding the most superior competition position.
•Have ISO9001 international quality certification to assure our high quality products.
•Over 20 years professional in fabricating blowing molding machines and tools.
]]>
steplead@steplead.com (Super User) Molding Machine Sun, 26 Apr 2015 00:21:09 +0000
1,200BPH automatic blow molder for 5L, 6L oil bottle, mineral water bottle. http://www.pbjandshay.com/index.php/pr/molders/item/118-1-200bph-automatic-blow-molder-for-5l-6l-oil-bottle-mineral-water-bottle http://www.pbjandshay.com/index.php/pr/molders/item/118-1-200bph-automatic-blow-molder-for-5l-6l-oil-bottle-mineral-water-bottle 1,200BPH automatic blow molder for 5L, 6L oil bottle, mineral water bottle.
The BMA-A25 automatic blow molding machine is a two-step down-blowing type automatic blow molding machine from our factory. From one cavity to four cavities, the largest volume is 5L or 6L. it is a multi-functional automatic blowing equipment capable of blowing 300 ml to 6 liters. It is suitable for the packaging of edible oil bottles, carbonated beverage bottles, mineral water bottles, cosmetic bottles and large-diameter bottles of any shape made of PET plastic

Uses CAD-CAM design molds, full anti-corrosion treatment, high-precision machining by CNC machine tools, to achieve smooth line capacity, consistent dimensions and design drawings after processing, and free design mold size drawings.

- The conveyor belt transports the preform from the hopper to the trainer, and the preforms are automatically arranged in sequence via the billet slide.

- The gripper takes the preform onto the revolution slider.

- The compacting device ensures that the feeding is reliable, transports the preform, and reduces the breaking down of machine caused by the preform jam.

The control system is the heart of the BMA-A25 automatic bottle blower. High-tech human-computer interaction control panel, light touch screen (optional), accurate control, simple parameter setting, clear numerical display, ideal memory storage capability.

The pneumatic dynamic system powers the operation of the BMA-A25. It uses world-renowned brand power components, like Festo in Germany, or Airtac in Taiwan to ensure high quality. These high-quality power components have specially-manufactured high-pressure valves, which have high motion accuracy, long service life, and stable performance. As the manufacturers of these famous brands of power components have outlets all over the world, customers can easily enjoy the after-sales service of related components locally.

BMA-A25 employs high quality imported sensing & switching systems including proximity switches, photoelectric switches, and electromagnetic switches. In order to ensure the orderly progress of the production process also avoid possible damage to the machine.

BMA-A25 uses infrared heating mode. Its superior thermal radiation and thermal penetration capabilities allow the machine to reach the required temperature during high-speed operation. The infrared lamps are distributed in three heating zones, with independent voltage adjustment modules and computer control systems, which can provide ideal heating effects for different types of preforms. The horizontal position of each infrared lamp can be adjusted to increase the flexibility of the machine.

The BMA-A25 uses a four-mode clamping device. In addition, there is a specially designed high-pressure assisted clamping device that provides a strong clamping force.

BMA-A25 automatic blow molding machine specially designed preform conveying system. The flip manipulator loads the preform into the preform chain holder, heats it, and then the manipulator puts the heated preform onto the blowing system. After blowing, the bottle was demolded by a flipper.
Or install a bottle connection mechanism at the blowing system, connect with the air slide conveyor, and directly transport the molded container to the filling system.

]]>
steplead@steplead.com (Super User) Molding Machine Thu, 19 Jul 2018 15:33:14 +0000
Hot fill bottle blow molder http://www.pbjandshay.com/index.php/pr/molders/item/122-hot-fill-bottle-blow-molder http://www.pbjandshay.com/index.php/pr/molders/item/122-hot-fill-bottle-blow-molder Hot fill bottle blow molder
The SBMH-II semi-automatic blow molding machine is a multifunctional plastic blowing machine. Mainly used in the production of various types of PET mineral water bottles below 3L, beverage bottles, oil bottles, medicine bottles and other plastic packaging bottles.?The blow molder is especially used in the production of high temperature filled PET bottles of 80-90 degrees Celsius.
The two blow molding systems of the machine run simultaneously with an infrared oven, which doubles the production speed of ordinary semi-automatic blow molding equipment. It is a popular and efficient blow molding equipment.

MECHANICAL FEATURES
  • Adopt advanced PLC control system, man-machine interface touch screen, stable performance and quick response;
  • Microcomputer control system with an accuracy of 0.01 seconds.
  • The finished product rejection rate is less than 0.1%
  • The infrared lamp is used for heating, the penetrating power is strong, the preform is rotated and heated, the track is revolved, the heating is uniform, fast and reliable;
  • Only one person is required for production operation. Adjustment, replacement and maintenance are quick and easy.
  • Fully adopt humanized design, use the latest control program, and adopt digital automatic control original in the electric control system to make the adjustment operation more convenient and applicable.
  • The clamping mechanism adopts the double-bend composite hinge-combined with the buffer cylinder, which has large clamping force, stable operation, sensitive and reliable action, and completely eliminates the phenomenon of rising mode.
  • Adopt a four-point synchronous mold adjustment mechanism to make the mold adjustment easy and precise.
  • In the design and manufacturing process, the new concept of environmental protection and energy conservation is always implemented, and the high-efficiency silencer is used to evacuate the discarded silencer after work, which greatly reduces noise and improves the environmental sanitation of the production site.
  • Adopt modular design and strong applicability. According to the processing property of plastics and the processing technology of the products, it can be equipped with aluminum oven, infrared oven, or corresponding pull-blow parts. This model is suitable for PET/PC/PP/PS/PMMA and another plastic polyester blowing. A variety of hollow products.
  • This model adopts manual and automatic conversion circuit control for easy adjustment and production. The automatic control adopts a multi-point adjustment circuit, which can adjust the action time of clamping, stretching and blowing, and maximize the product forming effect and product qualification rate.
  • Stable high and low-pressure gas circuit system to meet the needs of different air pressures for action and blowing;
  • Cold air circulation and water cooling circulation system ensure that the preform is heated evenly and the bottle mouth is not deformed;
  • Adopt international famous electronic and pneumatic components to ensure the stability and longevity of the machine;
  • Adopt the world first-class CAD/CAM/CAE technology to improve qualities and develop the new products.
  • Have ISO9001 and CE international quality certification to assure our high-quality products.
  • Over 20 years in blowing molding machine and tooling industry.
  • Exported our products to Japan, Europe, South & North America, Southeast and Middle-east of Asia, over 100 countries and areas, annual income over 7 million US dollars for these machines.
  • Machine is adopted the most advanced and market trend-leading technology, facilitating customer holding the most superior competitive position.
  • The use of advanced microcomputer control system, stable performance;
  • The conveyor automatically sends preforms;
  • The use of infrared lamp heating, penetrating power, preform rotation, heating, chain revolution, heating evenly, fast and reliable;
  • The width and height of the lamps and reflectors in the heating zone can be adjusted to suit the heating of preforms of different structures, and there is an automatic temperature-removal device to ensure the constant temperature of the drying tunnel;
  • Each mechanical movement has a safety self-locking device. When a certain process fails, the program will automatically switch to a safe state.
  • Each action is driven by the cylinder, does not use the oil pump, has no pollution, low noise and other advantages;
  • The air circuit design divides the action and air blowing into two parts to meet the requirements of different pressures for blowing bottles and movements;
  • High-pressure and double-cylinder linkage locking, strong clamping force;
  • There are manual and automatic methods of operation;
  • The safe and reliable valve position design makes the air pipeline clearer;
  • The production process is fully automated, with the advantages of low investment, high efficiency, easy operation, simple maintenance, and safety;
  • Keep bottle body away from pollution
  • Cooling system achieves the ideal cooling effect
  • Installation, start simple
  • Bottle rejection rate is less than 0.3%

CONTROL SYSTEM
The control system is the heart of the SBMH-II automatic bottle blower. High-tech human-computer interaction control panel, light touch screen (optional), accurate control, simple parameter setting, clear numerical display, ideal memory storage capability.
The operation panel uses a large-size English man-machine interface touch screen, and all operations, parameter setting, monitoring, product counting, wall thickness control and other visual operations. The device fault self-judgment shows that the operation is simple. The imported PLC programmable controller has the process parameter storage and transfer function, the reaction is fast, the positioning is accurate, and the system has high stability during operation.

PNEUMATIC SYSTEM
The pneumatic dynamic system powers the operation of the SBMH-II. It uses world-renowned brand power components, like Festo in Germany, or Airtac in Taiwan to ensure high quality. These high-quality power components have specially-manufactured high-pressure valves, which have high motion accuracy, long service life, and stable performance. As the manufacturers of these famous brands of power components have outlets all over the world, customers can easily enjoy the after-sales service of related components locally.

HEATING SYSTEM
SBMH-II uses infrared heating mode. Its superior thermal radiation and thermal penetration capabilities allow the machine to reach the required temperature during high-speed operation. The infrared lamps are distributed in three heating zones, with independent voltage adjustment modules and computer control systems, which can provide ideal heating effects for different types of preforms. The horizontal position of each infrared lamp can be adjusted to increase the flexibility of the machine.

CLAMPING SYSTEM & MOLDS
The SBMH-II uses a four-mode clamping device. In addition, there is a specially designed high-pressure assisted clamping device that provides a strong clamping force.

PREFORM CHAIN SYSTEM
SBMH-II automatic blow molding machine specially designed preform conveying system. The flip manipulator loads the preform into the preform chain holder, heats it, and then the manipulator puts the heated preform onto the blowing system. After blowing, the bottle was demolded by a flipper.
]]>
steplead@steplead.com (Super User) Molding Machine Thu, 16 Aug 2018 15:03:35 +0000
Auto bottle blower for bottle with pre insert handle http://www.pbjandshay.com/index.php/pr/molders/item/123-auto-bottle-blower-for-bottle-with-handle http://www.pbjandshay.com/index.php/pr/molders/item/123-auto-bottle-blower-for-bottle-with-handle Auto bottle blower for bottle with pre insert handle

The BMH-A5?automatic blow molding machine?is fully automatic blower for PET bottle with handle from 2L to 5L,?which?developed by our company using advanced bottle making technology. The machine has the characteristics of automation, high intelligence, stable and reliable machine performance, simple structure, high production efficiency, low energy consumption, and no pollution from intermediate links. It is widely used in the production of food, beverage, cosmetics and medical containers.

?

MECHANICAL FEATURES

  • Human machine interface control, easy to operate
  • Automatic embryo, upper embryo
  • Hopper bucket
  • Automatically discharging embryos is stable and reliable, and automatically controls the embryo according to the stock of the material.
  • Good sealing, no pollution
  • Heating system is perfect
  • The revolution and the rotation system are stable
  • When the preform warms up, it is evenly heated and easy to blow.
  • Less energy consumption, the heating temperature of each section of the embryo can be adjusted as needed
  • Infrared lamp in the oven can be equipped with a circulating air cooling system
  • Warming light box adopts automatic mutual feedback and closed-loop adjustment system, which can automatically and consistently output with constant power, which is not affected by voltage fluctuations.
  • Adopt advanced PLC control system, man-machine interface touch screen, stable performance and quick response;
  • Microcomputer control system with an accuracy of 0.01 seconds.
  • The finished product rejection rate is less than 0.1%
  • The infrared lamp is used for heating, the penetrating power is strong, the preform is rotated and heated, the track is revolved, the heating is uniform, fast and reliable;
  • Only one person is required for production operation. Adjustment, replacement and maintenance are quick and easy.
  • Fully adopt humanized design, use the latest control program, and adopt digital automatic control original in the electric control system to make the adjustment operation more convenient and applicable.
  • The clamping mechanism adopts the double-bend composite hinge combined with the buffer cylinder, which has large clamping force, stable operation, sensitive and reliable action, and completely eliminates the phenomenon of rising mode.
  • Adopt four-point synchronous mold adjustment mechanism to make the mold adjustment easy and precise.
  • In the design and manufacturing process, the new concept of environmental protection and energy conservation is always implemented, and the high-efficiency silencer is used to evacuate the discarded silencer after work, which greatly reduces noise and improves the environmental sanitation of the production site.
  • Adopt modular design and strong applicability. According to the processing property of plastics and the processing technology of the products, it can be equipped with aluminum oven, infrared oven, or corresponding pull-blow parts. This model is suitable for PET/PC/PP/PS/PMMA and other plastic polyester blowing. A variety of hollow products.
  • This model adopts manual and automatic conversion circuit control for easy adjustment and production. The automatic control adopts multi-point adjustment circuit, which can adjust the action time of clamping, stretching and blowing, and maximize the product forming effect and product qualification rate.
  • Stable high and low pressure gas circuit system to meet the needs of different air pressures for action and blowing;
  • Cold air circulation and water cooling circulation system ensure that the preform is heated evenly and the bottle mouth is not deformed;
  • Adopt international famous electronic and pneumatic components to ensure the stability and longevity of the machine;
  • Adopt the world first-class CAD/CAM/CAE technology to improve qualities and develop the new products.
  • Have ISO9001 and CE international quality certification to assure our high quality products.
  • Over 20 years in blowing molding machine and tooling industry.
  • Exported our products to Japan, Europe, South & North America, Southeast and Middle-east of Asia, over 100 countries and areas.
  • Machine is adopted the most advanced and market trend-leading technology, facilitating customer holding the most superior competition position.
  • The use of advanced microcomputer control system, stable performance;
  • The conveyor automatically sends preforms;
  • The use of infrared lamp heating, penetrating power, preform rotation, heating, chain revolution, heating evenly, fast and reliable;
  • The width and height of the lamps and reflectors in the heating zone can be adjusted to suit the heating of preforms of different structures, and there is an automatic temperature-removal device to ensure the constant temperature of the drying tunnel;
  • Each mechanical movement has a safety self-locking device. When a certain process fails, the program will automatically switch to a safe state.
  • Each action is driven by the cylinder, does not use the oil pump, has no pollution, low noise and other advantages;
  • The air circuit design divides the action and air blowing into two parts to meet the requirements of different pressures for blowing bottles and movements;
  • High-pressure and double-cylinder linkage locking, strong clamping force;
  • There are manual and automatic methods of operation;
  • The safe and reliable valve position design makes the air pipelineclearer;
  • The production process is fully automated, with the advantages of low investment, high efficiency, easy operation, simple maintenance, and safety;
  • Keep bottle bodyaway from pollution
  • Cooling system achieves ideal cooling effect
  • Installation, start simple
  • Bottle rejection rate is less than 0.3%

?

FLOW CHART

The preform fetcher, preform feeder, bottle fetcher, and the bottles line up are all automatically completed by the robot to avoid intermediate pollution.

]]>
steplead@steplead.com (Super User) Molding Machine Mon, 03 Sep 2018 14:44:29 +0000
爸爸不可以了太深了
        1. 
          
          <object id="u7b1b"></object><th id="u7b1b"></th>